Copyright © 2026 Fluent Conveyors, LLC. All rights reserved.
The Fluent Conveyors logo is a registered trademark of Fluent Conveyors, LLC. Serial Number 97664258 Registered on Dec. 12, 2023
Copyright © 2026 Fluent Conveyors, LLC. All rights reserved.
The Fluent Conveyors logo is a registered trademark of Fluent Conveyors, LLC. Serial Number 97664258 Registered on Dec. 12, 2023
Fluent sells bearings for our conveyors and general retrofits.
We deliver each bearing factory-assembled, pre-lubricated, and shaft-ready out of the box.
Pillow block bearings mount on pedestals parallel to the mounting surface, providing reliable shaft support for conveyor applications. These bearings accommodate standard conveyor shafts and offer straightforward installation on horizontal bases.
Our parts are manufactured in the USA at ISO 9001:2015-certified facilities.
3/4" to 7" (19mm to 180mm)
Cast iron, stainless steel (corrosive environments), composite (specialized applications)
1,000 lbs to over 30,000 lbs per bearing
Up to 3,600 RPM for ball bearings; tapered and spherical roller bearings optimized for heavy-load, moderate-speed applications
Temperature ratings vary by bearing family, seal, and grease
Ball bearings (high-speed, moderate loads)
Tapered roller bearings (combined radial/thrust loads)
Spherical roller bearings (extreme loads, self-aligning)
Standard steel, stainless steel, ceramic
Spherical bearings: Up to ±2° static and dynamic misalignment
Tapered/ball bearings: Require precise alignment
Trident triple-lip contact seals (dusty environments)
Labyrinth non-contact seals (high-speed/high-temperature)
Set screw, eccentric collar, tapered adapter sleeve, push-pull adapter systems
Light duty, medium duty, heavy duty
Meets or exceeds ABMA and ISO standards
We supply bearings in all standard sizes and can source uncommon sizes as needed.
Fluent builds custom conveyors for the most demanding environments on the planet. When you source through us, you're working with engineers with years of experience troubleshooting conveyors and choosing components for real-world performance.
Full bore size range, factory-assembled and pre-lubricated
Available for Fluent conveyors and retrofit applications
Selection and sizing guidance grounded in hands-on conveyor engineering experience
Lead time is 1–2 weeks depending on bearing specifications
[Display 2–3 related pages.]
