
Search our conveyor guides, or browse categories below.
Conveyors are the workhorses of the industrial world. From hair combs to hot clinker, they transport nearly everything we use. The conveyor belt must withstand continuous operation, extreme tension, constant impact, destructive materials, and harsh environments. Even the toughest conveyor belt has a service life that will eventually run out.
A conveyor belt must be fixed or replaced when it exhibits damage or excessive wear. We’ll look at the signs of belt wear and tear, some fixes that can extend your belt’s life, and how to replace a conveyor belt.
During routine maintenance, inspect the belt for signs of wear and tear. The abundance and severity of belt damage determine whether fixing or replacing the belt is the best option. Inspect the conveyor and belt for these signs of belt wear and tear:
All conveyor belts will degrade over time. Signs of damage don’t always necessitate replacement. Belts can undergo frequent repairs without compromising the safety and efficiency of your operation.
Conveyor belt repair can extend your belt’s life and fix minor damages.
You can fix a conveyor belt that has suffered localized damage (a sudden interaction with hot, abrasive, or falling materials). Cut out the damaged area and splice in a replacement section. This method is useful if the belt has torn or been damaged in a specific spot.
If you notice belt cupping or edge fraying early, you should adjust the conveyor to prevent serious belt damage. Belt cupping is fixed by altering the distance between the pulleys and the first troughing idlers. You might also need to reduce belt tension. Belt fraying is caused by poor alignment or mistracking. Recenter the belt and check the idlers for damage.
Splices tear if the belt ends aren’t squared or the splices are crooked. This is caused by a poor initial splice or warping in the belt. Recut the belt ends square, add a small belt patch, and splice using the centerline method to avoid irregularities in the belt.
Conveyor belts should be replaced following a proper maintenance schedule. It is best to replace belts before conveyor belt breakdowns jeopardize worker safety or cause unexpected downtime.
Before you order a conveyor belt replacement, take accurate measurements of your current belt.
If the belt is not attached to the conveyor:
If the belt is attached to a two-pulley conveyor:
If the belt is attached to a conveyor with more than two pulleys:
Belt stretching occurs as belts age. Older belts might be longer than their replacements. Check measurements against documentation to avoid ordering an oversized belt.
If your previous belt performed properly for its expected service life, replace it with the same belt type if possible.
If your previous belt mishandled materials, suffered premature wear, failed, or required excessive maintenance, choose a new belt based on these factors:
The correct belt will perform excellently in the conditions it is exposed to for its recommended service life.
Most conveyors use belts made of rubber, PVC, vinyl, fabric, or some other flexible belt material that loops to form an endless belt. Here's a step-by-step guide on how to replace a conveyor belt:
Always refer to the conveyor belt manufacturer's guidelines for specific instructions related to your type of belt. Regular maintenance and timely replacement of worn belts provide long-term, low-maintenance operation of your conveyor.
Metal conveyor belts attach to roller chain conveyors. Metal belts are modular, meaning individual plates can be replaced as needed. To replace a specific pan, follow these steps:
Follow this process to replace a single belt plate or the entire belt. Once all plates are removed, you can also replace the roller chains.
Conveyor belt replacement isn’t an easy job. Here are some tips you can use to simplify the process.
Replacing your conveyor belt can be done without the help of specialists, but it is a job for at least two people. Make sure to enlist the assistance of a second pair of hands. Fluent Conveyors provides field service for our conveyors and belts.
Don’t unroll the spare belt until you’re ready to attach it to the conveyor. Unrolled belts or improperly stored belts can camber.
For smaller conveyors that you can move, turn them on their side during belt replacement. This provides your team with easy access to all conveyor belt components.
Belt scrapers and guards are important safety features, but they get in the way during belt replacement. Remove anything that interacts with or covers the belt. Remove protruding metal fasteners and other components that constitute safety hazards during replacement.
Slow, even tension adjustments during belt removal and replacement protect the new belt and other conveyor components. Power tools can quickly add or remove too much tension at once. Use hand tools for small, incremental adjustments to protect your conveyor and personnel.
When you unroll the new belt, look for the arrows. They indicate which direction the belt should be installed. The arrows should point from the tail toward the head of the conveyor.
Drums and stud bars are easy to damage. Return belt tension slowly to keep components aligned and observe the system for irregularities.
We supply replacement conveyor belts and replacement conveyor parts. If you’d like help choosing a replacement belt, contact us. We’d be happy to guide you through the belt replacement process. Contact us through our website or call us at (866) 764-2980.
Conveyors are powerful systems that pose significant safety risks to workers. Hazards must be recognized to maintain a safe working environment and prevent accidents. Some common issues include:
Facilities should implement safety programs that include risk assessments, employee training, proper guarding and lockout/tagout procedures, housekeeping, and personal protective equipment (PPE) requirements.
The three primary failure modes for conveyor belts are yield, wear, and fatigue failure. Let’s take a look at the causes and differences between them:
Proper selection, installation, maintenance, and monitoring mitigate sudden belt failure.
Hot or burning materials and combustible environments cause conveyor belt fires. Seized idlers, overheated bearings, and belt misalignment can also cause fire through friction.
To prevent conveyor belt fires:
Conveyor fires also produce dangerous toxic gasses, thick smoke, and noxious fumes, especially in underground mining. Regulatory organizations and governmental agencies, such as BSI, CEMA, DIN, EN, and ISO maintain international safety standards for conveyor belts to prevent fire-related accidents worldwide.
A 3-ply conveyor belt has three layers of material reinforced with rubber compounds. The fabric plies, typically made from polyester or nylon, are arranged in a crisscross pattern and bonded together using high-quality rubber materials.
This construction provides improved tensile strength and durability, and excellent resistance to tearing and stretching. The top layer of the belt is covered with an abrasion-resistant rubber cover to protect the fabric plies from wear, while the bottom layer is coated with friction-optimized rubber to provide efficient power transmission and belt tracking.
Heat-resistant conveyor belts operate in a wide temperature range, typically up to 400 degrees Celsius (752 degrees Fahrenheit). Some high-temperature belts can withstand extreme temperatures up to 1000 degrees Celsius (1832 degrees Fahrenheit) for applications in steel mills and foundries.
Chemical-resistant conveyor belts withstand exposure to aggressive chemicals, acids, alkalis, solvents, and other corrosive substances. These belts feature specialized rubber compounds or synthetic materials in their covers and carcasses that resist chemical degradation, swelling, cracking, and premature failure.
Chemical-resistant belts provide reliable material handling in chemical processing plants, food processing facilities, recycling operations, pharmaceutical industries, and other environments where corrosive substances are present.
Ripstop belts offer outstanding tearing and abrasion resistance. Specially designed for use with abrasive, heavy materials, the belt carcass incorporates synthetic fabric plies and steel cord to enhance tensile strength and durability. Ripstop belts are compatible with flat idler conveyors, trough idler conveyors, trough slider bed conveyors, slider bed conveyors, and other belt conveyors.
Our belt conveyors (slider bed, flat idler, and trough idler) can be up to 84 inches wide, and our steel belt roller chain conveyors can be up to 120 inches wide.
We carry replacement rubber belts in 48, 60, 72, and 84 inches. Steel belts for roller chain conveyors come in 48, 60, 72, 84, and 96 inches, with larger custom replacement belts reaching 120 inches. Learn more about our belt widths.
From manufacturing facilities to recycling and waste management centers, conveyors perform a variety of functions:
At Fluent Conveyors, we understand the unique challenges and requirements of different industries. Our team of experienced professionals provides custom conveyor solutions that enhance efficiency, productivity, and safety.
With high-quality replacement conveyor parts and a commitment to exceptional customer service, we are your trusted partner in all your material handling needs.
Our conveyors excel in moving bulk materials in all industries and applications, including:
See the full list of industries we serve.
The processing time for your belt can range from three days to eight weeks, depending on the specific belt type required.


Copyright © 2026 Fluent Conveyors, LLC. All rights reserved.
The Fluent Conveyors logo is a registered trademark of Fluent Conveyors, LLC. Serial Number 97664258 Registered on Dec. 12, 2023